PC player survey

«1
BaronVonGoon
7055 postsMember, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
edited July 2019


Dpi: 800
In-game hip sens: 12
ADS sens: 50
FOV: 65
ADS FOV: ON/OFF? ON
FFR: ON/OFF? OFF

I was running 75 ADS sens but it felt a little jittery when aiming past medium range. Not sure if 50% is too low but I'm doing ok with it.

65 FOV because visibility is really bad in this game.

Post edited by BaronVonGoon on

Comments

  • Lahoo_Eckbert
    1319 postsMember, Battlefield 3, Battlefield 4, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    800
    13
    uniform soldier aiming everything at 100%(I'm just testing this, I had more complicated settings before)
    74
    ADS FOV off(because it reduced fps at some point)
    FFR Off (My in game latency is already putting me at a disadvantage, I usually play around 50 60ms, and I didn't want the added input lag)

    If it is a DMR, I usually use 2x or 3x.
    On automatics I usually use the reflex sight but I use iron sight as well in some cases.
    On snipers depending on the map and the game mode, I switch between 3x and 6x. In BF1 I almost always used iron sight on snipers since 1shot kills were a possibility and visibility was better.
    On LMG's 3x
    On MMG's 1.25x(that special MMG sight)

  • Soulbreeze
    386 postsMember, Battlefield 3, Battlefield 4, Battlefield, Battlefield 1, Battlefield V Member
    Dpi: 1100
    In-game hip sens: 11
    ADS sens: 100%
    FOV: 70
    ADS FOV: ON
    FFR: ON

    3x on most weapons. Irons on MMG's and some CQC weapons (1907, Suomi). 1.25x on a few medic weapons.



  • BaronVonGoon
    7055 postsMember, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    I notice on PC more players use 1x and irons than on console where it's 3x on everything.
  • TyroneLoyd_TV
    1774 postsMember, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    Dpi: 400
    Zowie fk2
    Gigantic mouse pad


    Soldier mouse aim sens: 8 to 12 % depending on how I feel that day.
    Soldier zoom aim sens: 100%
    FOV:92
    ADS FOV: ON
    If you want reduced visual recoil like you see on YouTube these settings are what you want. Sick and tired of people saying these youtubers have no recoil.


    FFR: ON

    Assault - iron sight or 3x
    Medic - iron sight
    Support - iron sight or 1x
    Recon - iron sight semi auto or 3x for bolt.

  • BaronVonGoon
    7055 postsMember, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    TyroneLoyd wrote: »
    Dpi: 400
    Zowie fk2
    Gigantic mouse pad


    Must be a full arm aimer. I can't do it, stuck with wrist aim, that's why I can't go below 800 dpi.
  • TyroneLoyd_TV
    1774 postsMember, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    TyroneLoyd wrote: »
    Dpi: 400
    Zowie fk2
    Gigantic mouse pad


    Must be a full arm aimer. I can't do it, stuck with wrist aim, that's why I can't go below 800 dpi.


    Nah

    Wrist for small micro adjustments during fire and arm for large movements such as turning and studder stepping/serpentine. Just depends on the situation or if I'm being a tryhard.

    I tend to get chronic headaches during competitive games / tournaments which is why I never pursued going any further. Games like battlefield keeps me in my comfort zone so I tend to lean towards these type of games.

    Everyones different i guess.
  • Soulbreeze
    386 postsMember, Battlefield 3, Battlefield 4, Battlefield, Battlefield 1, Battlefield V Member
    I'm a wrist aimer too most of the time. I just make sure I am set up to where my soldier does a 180 degree turn from full left to right wrist movement.
  • B0ng0_Banger
    1161 postsMember, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, Battlefield V Member
    Dpi: 800
    In-game hip sens: 16
    ADS sens: 55%
    FOV: 87 horz
    ADS FOV: off
    FFR: on

    Assault Rifle - iron sight or 3x
    Semi Auto rifle - 3x
    Medic - all, depending on the gun.
    Support - 3x
    Recon - 3x
  • StingX71
    828 postsMember, Battlefield 3, Battlefield 4, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    I know everyone is different. But I'm curious.

    Dpi: 3200
    In-game hip sens: 3
    ADS sens: 90%
    FOV: 70
    ADS FOV: ON/OFF? Off
    FFR: ON/OFF? On

    What scope level do you go for most of the time? For example, if you play with an StG do you run 1x, 1.5x/irons, 2x, 3x? Mostly stay below 2x, comes down to clarity for me. 



  • OskooI_007
    1310 postsMember, Battlefield 4, Battlefield, Battlefield 1, Battlefield V Member
    Mouse: Logitech G Pro (lighter weight the better)
    DPI: 2,700
    In-game sensitivity: 0%
    Mouse 360°: 30 centimeters
  • MachoFantast1c0
    2067 postsMember, Battlefield 4, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    DPI 600, in-game 4%, making out to 60.45 centimeters per 360 degrees. G305, thinking of going G Pro. USA on at 133 coefficient. FOV 90, ADS FOV on.

    I prefer iron sights in BF1, in BFV it's either Lattey, Nydar or the 2x scope (3x if 2x not available).
  • Lahoo_Eckbert
    1319 postsMember, Battlefield 3, Battlefield 4, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    Dpi: 400
    Zowie fk2
    Gigantic mouse pad


    Soldier mouse aim sens: 8 to 12 % depending on how I feel that day.
    Soldier zoom aim sens: 100%
    FOV:92
    ADS FOV: ON
    If you want reduced visual recoil like you see on YouTube these settings are what you want. Sick and tired of people saying these youtubers have no recoil.


    FFR: ON

    Assault - iron sight or 3x
    Medic - iron sight
    Support - iron sight or 1x
    Recon - iron sight semi auto or 3x for bolt.

    Which one gives the reduced recoil effect ? Wide FOV or ADS FOV ? And what's the reasoning behind it ? 
  • TyroneLoyd_TV
    1774 postsMember, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    Dpi: 400
    Zowie fk2
    Gigantic mouse pad


    Soldier mouse aim sens: 8 to 12 % depending on how I feel that day.
    Soldier zoom aim sens: 100%
    FOV:92
    ADS FOV: ON
    If you want reduced visual recoil like you see on YouTube these settings are what you want. Sick and tired of people saying these youtubers have no recoil.


    FFR: ON

    Assault - iron sight or 3x
    Medic - iron sight
    Support - iron sight or 1x
    Recon - iron sight semi auto or 3x for bolt.

    Which one gives the reduced recoil effect ? Wide FOV or ADS FOV ? And what's the reasoning behind it ? 
    ADS FOV in conjuntion with higher horizontal FOV 90 +


    The idea behind this is stretch your viewing angle so far that the models appear smaller on screen and becomes visibly further away.
    This give the sensation that visual recoil is reduced do to the weapon model "appearing" not to be able to travel as far on screen as it rocks back in forth shown in the video below.

    https://www.twitch.tv/videos/430672319

    Ideally this is beneficial for fps player struggling with handling recoil and gives you a larger sight line. 
    Many experienced fps players will use this method for the best advantage possible.

    Main drawbacks

    - Player models and objects appear smaller 
    - Frame rates are impacted (how much is dependent on your system)
    - BFV visibility issues are magnified slightly when such options are enabled ( which is why i never play on any setting other than low)

    Hope that helps somewhat.

     

     
  • DaChileanSeabass
    165 postsMember, Battlefield 3, Battlefield 4, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    Razer Mamba TE wired
    Steel series mouse pad

    DPI: 2850 (no x and y same checkbox)
    Ingame:
    FFR off and 1 in nvidia settings
    15% all mouse setting 
    fov74 (in bf5 terms, horizontal is 90)

    all scope settings same and i believe fov ads is Off
  • SuperiorByGender
    3239 postsMember, Battlefield 3, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    DPI: 1250 (Logitech G502 Hero)
    In-game sensitivity: 1% - 45 centimetres for full 360 rotation. 
    Uniform Soldier Aiming - ON (133%)
    FOV - 74 (90 In BF5 terms)
    ADS FOV - OFF
    FFR - ON

    I only put x3 scopes on semi autos and sniper rifles. With everything else I use reflex sight or irons on some guns like Bren or fast firing SMGs like MP28 because its impossible to ADS with that gun anyway.

  • LeonSKennedyyy
    1 postsMember, Battlefield, Battlefield 1, Battlefield V Member
    hello guys i cant join to battlefiled v cause he need to enter online i cant enter he ask me to join ea europe servers i buy i few months this game and i play for a lot months 3 weeks now i cant enter he offline
  • StarscreamUK
    7533 postsMember, Moderator, Battlefield 3, Battlefield 4, Battlefield Hardline, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Moderator
    You need to be online to play the multiplayer, the single player stories are offline game modes
  • VOLBANKER
    1718 postsMember, Battlefield 3, Battlefield 4, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    Shouldn't we write if it's 1080p or 1440p (or 4K!) too?

    I assume 1440p would require a higher sensitivity to move the mouse from one end of the screen to the other or what??
  • MachoFantast1c0
    2067 postsMember, Battlefield 4, Battlefield, Battlefield 1, CTE, BF1IncursionsAlpha, Battlefield V Member
    VOLBANKER wrote: »
    Shouldn't we write if it's 1080p or 1440p (or 4K!) too?
    I assume 1440p would require a higher sensitivity to move the mouse from one end of the screen to the other or what??

    No, screen pixel density doesn't matter. It doesn't affect how the game world is rendered into 2D.
  • TFBisquit
    2284 postsMember, Battlefield 3, Battlefield, Battlefield 1, Battlefield V Member
    Windows has a mouse speed setting in control panel, when set higher, you would need to lower your mouse sensitivity in mouse software.
    When left at default your mouse may or may not move as you want at default dpi settings.
    So some have it higher and therefor need lower sensitivity and viceversa. It all depends on how you want the mouse to move and at which speed.Using 800 or 1600, or even 3200/4000 dpi doesn't matter, what matters is that the mouse moves an x amount of space at your wrist/hand movement.
    This will always differ from person to person, although many leave it at default and just get used to the specific mouse.
Sign In or Register to comment.